To swap BNB to USDT, connect your wallet on BNB Chain, choose BNB as “from” and USDT (BEP-20) as “to”, review the quote and sign: it settles in one transaction for about $0.01 of gas. On October 31, 2026, $1,000 of BNB quoted 998.63 USDT. If you need USDT elsewhere, a one-step route delivered it to Solana in 3 seconds, Ethereum in 9 seconds and Tron in about 73 seconds.
Key Takeaways
- Route type: same-chain DEX aggregator swap on BNB Chain (6 routes on our check), or one-step cross-chain.
- Time: seconds on BNB Chain; 3-73 seconds to other networks.
- Cost: 0.25% route fee and about $0.01 of gas, before the 0.7% service fee.
- Main catch: BEP-20 USDT is not ERC-20 or TRC-20 USDT; deposit it only where BNB Chain is accepted.
What Is BNB?
BNB is the native coin of BNB Chain (formerly Binance Smart Chain, BSC) and pays gas for every transaction there, including moving BEP-20 tokens such as USDT. As a native coin it needs no approval to swap. One BNB was worth about $703 on our October 31, 2026 check.
What Is USDT?
USDT is Tether’s US dollar stablecoin. On BNB Chain it is the BEP-20 token at 0x55d398326f99059fF775485246999027B3197955 with 18 decimals (USDT on Ethereum and Tron uses 6). It is a separate token from USDT on Ethereum, Tron or Solana. See ERC-20 vs BEP-20 vs TRC-20.
How the BNB to USDT Swap Works
On BNB Chain, DEX aggregators (Nordstern, Fly, OKX DEX, SushiSwap, Bitget, 1inch on our check) compete for the trade and the best fill is used; you sign one transaction and USDT lands in the same 0x address. For USDT on another network, a bridge or solver (Across, Mayan Swift, Symbiosis) takes the BNB on BNB Chain and pays USDT on the destination in a single step; you sign only on BNB Chain.
Quotes by Amount (BNB Chain, October 31, 2026)
| You send | You receive | Route fee | Gas | Best route |
|---|---|---|---|---|
| $100 of BNB | 99.86 USDT | $0.25 | $0.01 | Nordstern |
| $1,000 of BNB | 998.63 USDT | $2.50 | $0.01 | Nordstern |
| $10,000 of BNB | 9,985.10 USDT | $25.00 | $0.02 | Nordstern |
USDT per dollar was flat to within 0.01% from $100 to $10,000. Quotes are LI.FI routes before the 0.7% Step Exchange service fee; they change every minute.
Which USDT Network Should You Receive? ($1,000 of BNB)
| Destination | You receive | Route | Time | Why choose it |
|---|---|---|---|---|
| BNB Chain (BEP-20) | 998.63 USDT | DEX | seconds | cheapest, stays on the same network |
| Solana | 998.00 USDT | Mayan Swift | about 3 s | cheap transfers afterwards |
| Ethereum (ERC-20) | 997.98 USDT | Across | about 9 s | DeFi and exchanges that only take ERC-20 |
| Tron (TRC-20) | 995.92 USDT | Symbiosis | about 73 s | payments and exchanges that default to TRC-20 |
Receiving on the network you will actually use saves a second bridge. Tron cost about $2.70 more than BNB Chain on $1,000, and moving USDT on Tron later needs TRX for energy, see USDT to TRX.
Step by Step
- Connect a wallet on BNB Chain with BNB.
- From: BNB. To: USDT on BNB Chain, or on Solana, Ethereum or Tron.
- Leave about 0.005 BNB when you set the amount.
- Paste the destination address if it is on another network.
- Confirm in your wallet.
Mistakes to Avoid
- Leaving no BNB for gas: after the swap the USDT needs BNB to move. Keep a small buffer.
- Depositing BEP-20 USDT to an exchange address that expects ERC-20 or TRC-20. Pick the same network on the deposit page.
- Reading balances with the wrong decimals: tools or scripts that assume 6 decimals show BEP-20 USDT amounts wrong; the token uses 18.
Going back: USDT to BNB. From BNB to other coins: BNB to ETH, BNB to USDC. Network basics: USDT networks.